==========================================================================

                PC Software Package (WV-ASM100L)
                   Read Me First

        (c) Panasonic System Networks Co., Ltd. 2010
==========================================================================

1. Introduction

   This CD-ROM contains PC Software Package, the WV-ASM100L, hereinafter referred as to this software.


2. Contents

   This CD-ROM has the following contents.
      |
      |--[1 dotNetFramework2.0]
      |   |-- dotnetfx.exe
      |
      |--[2 SQLServer2005]
      |   |--[Chinese]
      |   |   |--[Component]
      |   |   |   |-- resource.txt
      |   |   |   |-- SQLEXPR_CHS.EXE
      |   |   |-- SQLServerSetup.exe
      |   |
      |   |--[English]
      |   |   |--[Component]
      |   |   |   |-- resource.txt
      |   |   |   |-- SQLEXPR.EXE
      |   |   |-- SQLServerSetup.exe
      |   |
      |   |--[French]
      |   |   |--[Component]
      |   |   |   |-- resource.txt
      |   |   |   |-- SQLEXPR_FRA.EXE
      |   |   |-- SQLServerSetup.exe
      |   |
      |   |--[German]
      |   |   |--[Component]
      |   |   |   |-- resource.txt
      |   |   |   |-- SQLEXPR_DEU.EXE
      |   |   |-- SQLServerSetup.exe
      |   |
      |   |--[Italian]
      |   |   |--[Component]
      |   |   |   |-- resource.txt
      |   |   |   |-- SQLEXPR_ITA.EXE
      |   |   |-- SQLServerSetup.exe
      |   |
      |   |--[Russian]
      |   |   |--[Component]
      |   |   |   |-- resource.txt
      |   |   |   |-- SQLEXPR_RUS.EXE
      |   |   |-- SQLServerSetup.exe
      |   |
      |   |--[Spanish]
      |       |--[Component]
      |       |   |-- resource.txt
      |       |   |-- SQLEXPR_ESN.EXE
      |       |-- SQLServerSetup.exe
      |
      |--[3 Disk Recorder Management Software]
      |   |-- setup.exe
      |
      |--[Instructions]
      |   |--[English]
      |   |   |-- Operating Instructions.pdf
      |   |   |-- Setup Instructions.pdf
      |   |   |-- Available function list for each compatible device.pdf
      |   |   |-- Precautions when using the WV-ASM100 with the WJ-RT416.pdf
      |   |
      |   |--[French]
      |   |   |-- Operating Instructions.pdf
      |   |   |-- Setup Instructions.pdf
      |   |   |-- Installation Guide.pdf
      |   |   |-- Available function list for each compatible device.pdf
      |   |
      |   |--[German]
      |   |   |-- Operating Instructions.pdf
      |   |   |-- Setup Instructions.pdf
      |   |   |-- Installation Guide.pdf
      |   |   |-- Available function list for each compatible device.pdf
      |   |
      |   |--[Italian]
      |   |   |-- Operating Instructions.pdf
      |   |   |-- Setup Instructions.pdf
      |   |   |-- Installation Guide.pdf
      |   |   |-- Available function list for each compatible device.pdf
      |   |
      |   |--[Russian]
      |   |   |-- Operating Instructions.pdf
      |   |   |-- Setup Instructions.pdf
      |   |   |-- Installation Guide.pdf
      |   |   |-- Available function list for each compatible device.pdf
      |   |
      |   |--[Spanish]
      |   |   |-- Operating Instructions.pdf
      |   |   |-- Setup Instructions.pdf
      |   |   |-- Installation Guide.pdf
      |   |   |-- Available function list for each compatible device.pdf
      |
      |-- Readme.txt


  (1) 1 dotNetFramework2.0
     Double-click "dotnetfx.exe" in the folder "1 dotNetFramework2.0".
     ->The installer of ".NET Framework2.0 SP1" will be launched.
       Install the software by following the instructions displayed on the monitor.

  (2) 2 SQLServer2005
     Double-click "SQLServerSetup.exe" in the folder "2 SQLServer2005".
     ->The installer of "SQLServer2005 Express Edition SP3" will be launched.
       Install the software by following the instructions displayed on the monitor.

  (3) 4 Disk Recorder Management Software
     Double-click "setup.exe" in the folder "3 Disk Recorder Management Software".
     ->The installer of "Disk Recorder Management Software" will be launched.
       Install the software by following the instructions displayed on the monitor.
 
  (4) Instructions
     Double-click "Operating Instructions.pdf" to open the Operating Instructions. 
     Double-click "Setup Instructions.pdf" to open the Setup Instructions. 
     Double-click "Available function list for each compatible device.pdf" to open
     the Available function list for each compatible device. 
   
     Note: Adobe(R) Reader(R) is required to open Operating instructions, Setup instructions 
           and Available function list for each compatible device.
           If the Adobe Reader is not installed in then PC yet, download the latest Adobe
           Reader from the Adobe web site and install it. 

  (5) Company name 
     Although there is a potential that this software will display previous company name such as 
     "Matsushita Electric Industrial Co., Ltd.(MEI)" or "Panasonic Corporation", these are not 
     any issues and this software works properly.


3. Caution

  (1) Playback
  - It may take time so that playback images will be displayed in the area where live     
    images are being displayed.
  - Playback images sometimes may not be refreshed exactly at the set refresh interval.

  (2) Multi-monitor function
  - When you use the multi-monitor function, select the same resolution of each monitor.


4. Disclaimer of warranty

   IN NO EVENT SHALL PANASONIC SYSTEM NETWORKS CO.,LTD. BE LIABLE TO ANY PARTY OR 
   ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE
   CASES, INCLUDING BUT NOT LIMITED TO BELOW:

  (1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL,  
      CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;

  (2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION
      OF THE USER;

  (3) UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER;

  (4) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE     
      SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY;

  (5) ANY CLAIM OR ACTION FOR DAMAGES, BROUGHT BY ANY PERSON OR ORGANIZATION BEING A
      PHOTOGENIC SUBJECT, DUE TO VIOLATION OF PRIVACY WITH THE RESULT OF THAT 
      SURVEILLANCE-CAMERA'S PICTURE, INCLUDING SAVED DATA, FOR SOME REASON, BECOMES 
      PUBLIC OR IS USED FOR THE PURPOSE OTHER THAN SURVEILLANCE. 

5. About Windows Vista and Windows 7

  5.1 System requirements

    It is recommended to install this software on a PC that meets the following system requirements.

    OS 					Microsoft(R) Windows 7 Professional (32-bit)
					Microsoft(R) Windows 7 Professional (64-bit)
                                        Microsoft(R) Windows Vista(R) Business SP2 (32-bit)
                                        Microsoft(R) Windows Vista(R) Business SP2 (64-bit)
    OS language 			English, French, Spanish, German, Italian, Russian,
                                        Chinese (Simplified Chinese)
    Computer 				IBM PC/AT Compatible
    CPU 				Intel(R) Core(TM) 2 Duo 2.66GHz or faster
                                        Intel(R) Core(TM) 2 Quad Q9650 or faster(When operating H.264 images)
                                        Intel(R) Core(TM) i7-920 or faster(When operating H.264 images) 
    Memory 				2GB or more
                                        3GB or more(When operating H.264 images)
    Video memory 			VRAM 128MB or more, compatible with DirectX9.0c
    CD-ROM drive 			Necessary to install this software
    USB port 				Necessary to connect the provided hardware key (USB dongle)
    Required hard disk space            Approx.	3GB
    Monitor 				1024 x 768 pixels or more (1280 x 1024 pixels recommended), 
                                        24-bit True color or better (Full color recommended)
    Interface 				100/1000 Mbps Network interface card must be installed

  5.2 Installation

    - You do not have to install Microsoft(R) .NET Framework 2.0 SP1.
    - When you install the software, you can see the messages described below. Please refer 
      the procedure for each message.
      (1) "User Account Control"
          If you see this message, please select "Continue" or "Yes" and continue the installation.

  5.3 Setup software

    - When you start ASM100, you  may see this message.
      (1) "User Account Control"
          If you see this message, please select "Allow" or "Yes" and continue the ASM100 operation procedure.

  5.4 Uninstallation

    - When you uninstall the software, you may these messages.
      (1) "User Account Control"
          If you see this message, please select "Allow" or "Yes" and continue the uninstall procedure.
      (2) "The following applications should be closed before continuing the installation"
          When a message window is displayed in the process of the uninstallation to ask you to quit the 
          applications, click the "Cancel" button on the displayed window to cancel the uninstallation. 
          After stopping the appropriate services, retry the uninstallation.
